Halogen Moisute Meter Vm-E Series

• Customization: Available
• Warranty: 1 Year
• Type: Halogen Moisture Meter
• Model NO.: VM-E
• Display: ExtraLCD
• Application: All Industry
• Portable: Optional
• Physical Analysis Type: Weightlessness Method
• Chemical Analysis Type: None
• Operating Mode: Touch Screen
• Heating Mode: Standard Heating
• Off Mode: Automatic
• Temperature Sensor: PT1000
• Heating Temperature Range: 40-250
• Time Setting: 0~99 Minutes, Interval 1 Minute
• Stop Mode: Automatic Stop, Manual Stop, Timing Stop
• Transport Package: Carton
• Specification: 540mm*410mm*400mm
• Trademark: VicoMeter
• Origin: China
• HS Code: 9027809900
• Production Capacity: 50000sets

Product Description

Introduction:
VM-E series "drying method" halogen moisture analyzer using high efficiency drying heater - high quality cyclic halogen light, the lamp heats the sample quickly and evenly, and the moisture of the sample is continuously dried. The entire measurement process is fast, automatic and simple. The instrument displays the measurement results in real time: moisture value, solid content, water weight dry weight ratio, wet weight dry weight ratio, sample initial value, final value, measurement time, the final temperature value, trend curve, etc.
The instrument can input data to printer, computer, PLC, etc. through RS232 serial port, which can be used in a few minutes (most samples), quickly measure the moisture in solid, liquid and powder, easy to operate, integrate multiple heating modes, and work in a variety of ways. Demand is widely and used in industries such as Grain, food, agriculture, chemicals, plastics, new energy, new materials, medicine, scientific research and testing etc.
VM-E Series " drying method " halogen moisture analyzer principle:
The heating weight loss method is a kind of physical analysis method for moisture determination, which uses the influence of temperature on water volatilization to dry out the moisture in the material. The internationally accepted standard measurement method is the oven method. As the name suggests, the material sample is placed in an oven for drying and heating, and then weighed by an electronic balance. The moisture value is calculated manually.
VM-E Series distinguish it from other products is that the traditional moisture measurement is used oven drying method. The test of one sample takes two to three or even three to four hours, and it needs to be weighed manually and calculated by the balance to get the moisture value of the sample. The low efficiency of the traditional oven method for moisture determination cannot adapt to the high - tempo enterprise production needs.
The moisture meter use halogen light as heating source, so called Halogen Moisture Analyzer,
Principle is implantation halogen gas such as iodine or bromine in the bulb, at high temperature effect. The sublimated tungsten filament chemically interacts with the halogen, the sublimated tungsten will re- solidify on the tungsten wire to form a balanced cycle to prevent premature rupture of the tungsten wire. Therefore, halogen bulbs are longer than incandescent lamps. At the same time, because the filament can work at higher temperatures, so higher brightness, higher color temperature and higher luminous efficiency are obtained.
 VM-E Series " drying method " halogen moisture analyzer integrated upgrade the principle of international oven drying method, the heating module, the weighing module, the operation module and the human-machine intelligent module are perfectly combined, measurement trend and the measurement result system are automatically determined and automatically stopped. The results are in good agreement with the oven method for moisture determination, and the work efficiency is much higher than the oven method for moisture determination. Use VM- E10 " Drying" method halogen moisture meter, the general sample can be measured in just a few minutes, so it is favored and praised by enterprise users.


 

Model	VM-E100	VM-E50	VM-E20	VM-E10	VM-E01
Weighing Accuracy (d)	0.01g	0.005g	0.002g	0.001g	0.0001g
Moisture Readability	0.01%				0.001%
Moisture Range MC% Solid Content Range DC%	0.00% -100.00%				0.000% -100.000%
Weight Sensor	HBM Strain Gauge Force			Electromagnetic Force
Weighing Range	128g (optional 224g/300g)
Calibration Method	External Weight Calibration (Single-Point & Multi-Points)
Repeatability (Standard Deviation)	≤3d
Heating Source	Halogen Lamp
Temperature Sensor	PT-1000 Temperature Transmitter
Heating Program	Standard Heating, Step heating, Rapid heating, Soft Heating
Heating Temperature Range	40-250ºC
Temperature Accuracy	0.1ºC
Heating Time setting	1-99 minutes by 1 minute
Stop Mode	Timing, Manual, Automatic
Measurement Data	2004 sets
Display Data	MC%(Moisture),DC%(Solid Content), ATRO Dry, ATRO Wet,Sample Weight,Moisture Weitht,Dryer Sample Weitht,Tempreture,Time, Analysis Curve
Function	Custom Measurement Method, U Disk System Upgrade
Display& Operating	5-Inch Capacitive Touch Screen
Sample Tray	50 aluminum sample trays with 90mm diameter, optional stainless steel sample tray
Sample Height	24.5mm
Sample Pan	Aluminum Sample Pan(50pcs), Stainless Steel Sample Pan(4pcs)
Thermal Protection	Aluminum High Temperature Radiator
Baud rate	2400,4800,9600,19200
Data Communication	RS232/RS485(can be connected to a computer, printer, PLC, etc.)
Print Function	Optional Printer (thermal, needle, adhesive, etc.)
Use Environment	1-38ºC (18-25ºC ideal temperature)
Power	Voltage 220v±10%, frequency 50HZ±1HZ (110V power supply and power cord can be customized for export)
Host Size (W*D*H)	315mm*210mm*205mm
Voltage	220V or 110V 50HZ   Max 500W
Weight	5.8KG			8.8KG

 

 

After-sales service	1-3 years warranty
	Lifetime technical consultant
Calibration certificate	Provide calibration certificate for each product

Q1: Why choose Victor Instrument Meter?

A: We want to create a superior quality company and to win your trust.

 

Q2: Can I have a sample order for moisture meter?

A: Yes, we warmly welcome sample order to test and check quality.

 

Q3: Do you have any MOQ limit for moisture meter order?

A: Low MOQ, 1 PC for sample checking is available.

 

Q4: What about the lead time?

A: Sample needs 3-5 day, mass production needs about 2-3 weeks for order quantity more than one container.

 

Q5: How do you ship the goods and how long does it take to arrive?

A:Airline and sea shipping is optional. Shipping time depends on distance.

 

Q6: Is it ok to print my logo on moisture meter?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

 

Q7: How about the guarantee for the products?

A: Yes. We offer one year warranty to our products.

 

Q8: How about the payment method?

A: 1.West Union or 100%TT
    2.100% irrevocable L/C at sight.

 

Q9: Can I trust Victor Instrument Meter?

A: Of course, you can trust us. More than 300 oversea customers appreciate our quality and service. With us your money in safe and your business in safe!

Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.